CTC Union GSW-3208M, Руководство пользователя

Страница: 21 / 148

Chapter 6. Manage / Configure the Switch
21
[ guest mode ]
If “ guest ” / “ guest ” is used for username / password, the console interface will enter guest mode. Its prompt is ended
with “ > ”. With “ ? ” command, you can find the command list as follow.
------------------------------------------------------------------------------------
> ?
exit Exit from current mode
help Show available commands
history Show a list of previously run commands
logout Disconnect
ping Sends ICMP echo packets to other network nodes
quit Quit commands
show Show the counters that the system uses
>
------------------------------------------------------------------------------------
In guest mode, it is allowed to view the switch configuration only. No setup/ configure commands are supported.
<< Function Keys >>
Here is the function keys for console interface.
[ Tab ] key: this key can help to get the full command keyword with just several beginning letters. For example, “cal-
Tab” will get the full “calendar” command word.
[ Esc ] key: this key can use to break message display and go back to command prompt.
[ Up-Arrow ] key: this key can get last input command.
[ Down-Arrow ] key: this key can get next input command.
[ Left-Arrow ]/[ Right-Arrow ] key: the key can move the cursor.
[ Backspace ] key: this key can delete the letter in front of cursor
[ ? ] key: this key can get the command list.