CTC Union GSW-3208M, Руководство пользователя

Страница: 41 / 148

Chapter 6. Manage / Configure the Switch
41
mvr Multicast VLAN Registration
qos Configuration of QoS
queue Assigns priority queues
radius-server Configures login to RADIUS server
rate-limit Configures rate-limits
snmp-server Modifies SNMP server parameters
sntp Simple Network Time Protocol configuration
spanning-tree Configures spanning tree parameters
storm-control Configures storm control
trunk Configures trunk function
For example,
“ mirror ” command can enable the mirror function and “ no mirror ” command can disable it.
“ ip default-gateway 192.168.1.100 ” will set the IP gateway of the switch to 192.168.1.100, and “ no ip default-
gateway ” will put it to factory default setting 192.168.1.254.
22 prompt command
This command is used to set the prompt word for console.
For example,
(config)# prompt AAA
AAA(config)#
23 qos command
This command is used to enable QoS function of the switch. And “ no qos ” can be used to disable it.
The traffic scheduling mode (strict priority - ST or weight round robin - WRR) is selected in “queue” command. And
the weighting of each queue is also set in “queue” command if WRR is selected.
The other QoS settings on ports are configured
in “(config-if)#”
mode (go with “interface ethernet 1/x” command. “x”
is the port number.) Please refer to “qos” command in Section 6.2.4.1 for the details.
24 queue command
This command is used to select traffic scheduling mode (strict priority or weight round robin). If WRR is selected,
weighting of each queue is also set with this command.