CTC Union GSW-3208M, Руководство пользователя

Страница: 101 / 148

Chapter 6. Manage / Configure the Switch
101
[ Static Mac ID Filter on Port ]
This function can limit only those static Mac addresses on the port can access network. Other Mac addresses will be
rejected by the port. Sometimes it is called “Mac-Port Binding”.
Follow the steps to configure it.
a. Set the “Security Control” to “Accept” on those ports that will apply static Mac ID security. Then click [Apply].
b. Set Static Mac Addresses that are allowed for network access at [Static Address] of [Address Table] function.
Please refer to that section for the details.
[ Dynamic Mac ID Number Limit on Port ]
This function can limit the Mac ID number to access network through a port. For example, five Mac ID are allowed for
Port 2. That means up to five users are allowed, but don’t care who the users are.
Follow the steps to configure it.
a. Set the “Security Control” to “Limited by MAC no.” on those ports that will apply dynamic Mac ID number
security. And set the “Max. MAC no.” to the users number allowed on the ports.
b. Then click [Apply].
The switch will learn users automatically and show current user number at “Learned no.”.
3). 802.1x Configuration
If 802.1x function is enabled, the switch will act as an authenticator for users accessing network through the switch. It
needs a RADIUS server for the authentication function. Users will be asked for username and password before
network access. If the RADIUS server authenticates it, the switch will enable the port for network access. This
function is very useful for network security application to prevent illegal users access network through the switch.