ComAp InteliMains NT IM-NT, Справочное руководство

Страница: 382 / 437

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
382
13.2.1.95 Binary input: Force block 1
Related FW standard v3.1.0
Description This is one of three binary inputs used for user-defined blocking of
protections. If the input is active, all the protections that have
Protection block
type configured as Force block 1 block type are blocked (i.e. temporarily
disabled).
13.2.1.96 Binary input: Force block 2
Related FW standard v3.1.0
Description This is one of three binary inputs used for user-defined blocking of
protections. If the input is active, all the protections that have
Protection block
type configured as Force block 2 block type are blocked (i.e. temporarily
disabled).
13.2.1.97 Binary input: Force block 3
Related FW standard v3.1.0
Description This is one of three binary inputs used for user-defined blocking of
protections. If the input is active, all the protections that have
Protection block
type configured as Force block 3 block type are blocked (i.e. temporarily
disabled).
13.2.1.98 Binary input: Lang sel int A
Related FW standard v3.1.0
Description This is one of three binary inputs Lang sel int A , Lang sel int B , Lang sel int
C , used for selecting language of the built-in IG-NT terminal (display). As the
IS-NT does not have built-in terminal, this input is assigned to the terminal
(display) #1, which is supposed to be directly attached to the controller or
mounted close to it.
N
OTE
:
Using these inputs for language selection is an option only. If the inputs are
not configured, the language can be selected using the menus on the
terminal.
E
NCODING TABLE
L
ANGUAGE INDEX
I
NPUT
A I
NPUT
B I
NPUT
C
0 0 0 0