ComAp InteliMains NT IM-NT, Справочное руководство

Страница: 156 / 437

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
156
11.2.1.5 Setpoint: Import load
Group Process Control
Range [units] -32000 .. 32000 [kW]
Related FW standard v3.1.0
Description
This setpoint is used for adjusting of the requested mains import if the load
control mode is set to IMP/EXP ( #SysLdCtrl PtM = LDSHARING and MLoad
ctrl PtM = IMP/EXP)
This setpoint is also used for adjusting of the maximum allowed export if
export limit function is active ( Export limit = ENABLED).
N
OTE
:
Negative value of import is export , i.e. the power flows into the mains .
N
OTE
:
The actual setpoint units and range depend on setting of the Power format in
GenConfig.
11.2.1.6 Setpoint: Import PF
Group Process Control
Range [units] 0.60 .. 1.20 [-]
Related FW standard v3.1.0
Description The setpoint is used to adjust the requested power factor at the mains in
import/export mode (i.e.
#SysPFCtrl PtM = VSHARING and PF ctrl PtM =
IMP/EXP).
Values over 1.00 mean capacitive load character, i.e. setting 0.95 means
0.95L and setting 1.05 means 0.95C.
11.2.1.7 Setpoint: MLoad ctrl PtM
Group Process Control
Range [units] SYSBLD->LS, ANEXSYSBLD->LS, IMP/EXP, ANEXT IMP/EXP, T BY PWR
[-]
Related FW standard v3.1.0
Force value
possible YES