Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 866 / 1204

35-46
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 35 Configuring IP Unicast Routing
Configuring BGP
Distance
•
External route administrative distance: 20 (acceptable values are from 1 to 255).
•
Internal route administrative distance: 200 (acceptable values are from 1 to 255).
•
Local route administrative distance: 200 (acceptable values are from 1 to 255).
Distribute list
•
In (filter networks received in updates): Disabled.
• Out (suppress networks from being advertised in updates): Disabled.
Internal route redistribution Disabled.
IP prefix list None defined.
Multi exit discriminator (MED) • Always compare: Disabled. Does not compare MEDs for paths from neighbors in
different autonomous systems.
•
Best path compare: Disabled.
• MED missing as worst path: Disabled.
•
Deterministic MED comparison is disabled.
Neighbor
•
Advertisement interval: 30 seconds for external peers; 5 seconds for internal peers.
• Change logging: Enabled.
•
Conditional advertisement: Disabled.
• Default originate: No default route is sent to the neighbor.
•
Description: None.
• Distribute list: None defined.
•
External BGP multihop: Only directly connected neighbors are allowed.
• Filter list: None used.
•
Maximum number of prefixes received: No limit.
• Next hop (router as next hop for BGP neighbor): Disabled.
•
Password: Disabled.
• Peer group: None defined; no members assigned.
•
Prefix list: None specified.
• Remote AS (add entry to neighbor BGP table): No peers defined.
•
Private AS number removal: Disabled.
• Route maps: None applied to a peer.
•
Send community attributes: None sent to neighbors.
• Shutdown or soft reconfiguration: Not enabled.
•
Timers: keepalive: 60 seconds; holdtime: 180 seconds.
• Update source: Best local address.
•
Version: BGP Version 4.
• Weight: Routes learned through BGP peer: 0; routes sourced by the local router:
32768.
Table 35-9 Default BGP Configuration (continued)
Feature Default Setting