Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 973 / 1204

39-17
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 39 Configuring HSRP and Enhanced Object Tracking
Configuring Enhanced Object Tracking
This example configures tracked list 4 with three objects and a specified percentages to measure the state
of the list:
Switch(config)# track 4 list threshold percentage
Switch(config-track)#
object 1
Switch(config-track)# object 2
Switch(config-track)# object 3
Switch(config-track)#
threshold percentage up 51 down 10
Switch(config-track)# exit
Configuring HSRP Object Tracking
Beginning in privileged EXEC mode, follow these steps to configure a standby HSRP group to track an
object and change the HSRP priority based on the object state:
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2 track object-number { interface
interface-id { line-protocol | i p
routing} | ip route
ip-address/prefix-length { metric
threshold | reachability} | list
{ boolean { and | or }} | { threshold
{ weight | percentage }}}
(Optional) Create a tracking list to track the configured state and enter
tracking configuration mode.
Note Although visible in the command-line help, the rtr keyword is not
supported.
•
The object-number range is from 1 to 500.
•
Enter interface interface-id to select an interface to track.
– Enter line-protocol to track the interface line protocol state.
–
Enter ip routing to track the interface IP routing state.
• Enter ip route ip-address/prefix-length to track the state of an IP route.
–
Enter metric threshold to track the threshold metric. The default up
threshold is 254 and the default down threshold is 255.
–
Enter reachability to track if the route is reachable.
•
Enter list to track objects grouped in a list. Configure the list as
described on the previous pages.
–
For boolean , see the “Boolean Expression” section on page 39-14
–
For threshold weight , see the “Weight Threshold” section on
page 39-15
– For threshold percentage , see the “Percentage Threshold” section
on page 39-16
Note
Repeat this step for each interface to be tracked.
Step 3 exit Return to global configuration mode.
Step 4
interface interface-id Enter interface configuration mode.