Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 144 / 1204

5-22
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 5 Managing Switch Stacks
Configuring the Switch Stack
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 0016.4727.a900 1 0 Ready
Assigning Stack Member Information
These sections describe how to assign stack member information:
•
Assigning a Stack Member Number, page 5-22 (optional)
• Setting the Stack Member Priority Value, page 5-22 (optional)
•
Provisioning a New Member for a Switch Stack, page 5-23 (optional)
Assigning a Stack Member Number
Note
This task is available only from the stack master.
Beginning in privileged EXEC mode, follow these steps to assign a member number to a stack member.
This procedure is optional.
Setting the Stack Member Priority Value
Note This task is available only from the stack master.
Beginning in privileged EXEC mode, follow these steps to assign a priority value to a stack member:
This procedure is optional.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2 switch current-stack-member-number
renumber new-stack-member-number
Specify the current stack member number and the new stack member
number for the stack member. The range is 1 to 9.
You can display the current stack member number by using the show
switch user EXEC command.
Step 3 end Return to privileged EXEC mode.
Step 4 reload slot stack-member-number Reset the stack member.
Step 5 show switch Verify the stack member number.
Step 6
copy running-config startup-config Save your entries in the configuration file.
Command Purpose
Step 1 configure terminal Enter global configuration mode.