Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 658 / 1204

31-6
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 31 Configuring SNMP
Configuring SNMP
SNMP ifIndex MIB Object Values
In an NMS, the IF-MIB generates and assigns an interface index (ifIndex) object value that is a unique
number greater than zero to identify a physical or a logical interface. When the switch reboots or the
switch software is upgraded, the switch uses this same value for the interface. For example, if the switch
assigns a port 2 an ifIndex value of 10003, this value is the same after the switch reboots.
The switch uses one of the values in Table 31-3 to assign an ifIndex value to an interface:
Note
The switch might not use sequential values within a range.
Configuring SNMP
These sections contain this configuration information:
• Default SNMP Configuration, page 31-7
•
SNMP Configuration Guidelines, page 31-7
• Disabling the SNMP Agent, page 31-8
•
Configuring Community Strings, page 31-8
• Configuring SNMP Groups and Users, page 31-10
•
Configuring SNMP Notifications, page 31-12
• Setting the Agent Contact and Location Information, page 31-15
•
Limiting TFTP Servers Used Through SNMP, page 31-16
• SNMP Examples, page 31-16
Table 31-3 ifIndex Values
Interface Type ifIndex Range
SVI
1
1. SVI = switch virtual interface
1–4999
EtherChannel 5000–5012
Loopback 5013–5077
Tunnel 5078–5142
Physical (such as Gigabit Ethernet or SFP
2
-module interfaces)
2. SFP = small form-factor pluggable
10000–14500
Null 14501