Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 479 / 1204

C H A P T E R
20-1
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
20
Configuring Optional Spanning-Tree Features
This chapter describes how to configure optional spanning-tree features on the Catalyst 3750 switch.
You can configure all of these features when your switch is running the per-VLAN spanning-tree plus
(PVST+). You can configure only the noted features when your switch stack is running the Multiple
Spanning Tree Protocol (MSTP) or the rapid per-VLAN spanning-tree plus (rapid-PVST+) protocol.
Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
For information on configuring the PVST+ and rapid PVST+, see Chapter 18, “Configuring STP.” For
information about the Multiple Spanning Tree Protocol (MSTP) and how to map multiple VLANs to the
same spanning-tree instance, see
Chapter 19, “Configuring MSTP.”
Note
For complete syntax and usage information for the commands used in this chapter, see the command
reference for this release.
This chapter consists of these sections:
• Understanding Optional Spanning-Tree Features, page 20-1
•
Configuring Optional Spanning-Tree Features, page 20-11
• Displaying the Spanning-Tree Status, page 20-19
Understanding Optional Spanning-Tree Features
These sections contain this conceptual information:
•
Understanding Port Fast, page 20-2
• Understanding BPDU Guard, page 20-2
•
Understanding BPDU Filtering, page 20-3
• Understanding UplinkFast, page 20-3
•
Understanding Cross-Stack UplinkFast, page 20-5
• Understanding BackboneFast, page 20-7
•
Understanding EtherChannel Guard, page 20-10
• Understanding Root Guard, page 20-10
•
Understanding Loop Guard, page 20-11