Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 901 / 1204

35-81
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 35 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
To delete an entry, use the no route-map map tag global configuration command or the no match or no
set route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Beginning in privileged EXEC mode, follow these steps to control route redistribution. Note that the
keywords are the same as defined in the previous procedure.
Step 14
set origin { igp | egp as | incomplete } Set the BGP origin code.
Step 15
set as-path { tag | prepend as-path-string } Modify the BGP autonomous system path.
Step 16 set level { level-1 | level-2 | level-1-2 | stub-area |
backbone }
Set the level for routes that are advertised into the
specified area of the routing domain. The
stub-area and
backbone are OSPF NSSA and backbone areas.
Step 17 set metric metric value Set the metric value to give the redistributed routes (for
EIGRP only). The
metric value is an integer
from -294967295 to 294967295.
Step 18 set metric bandwidth delay reliability loading mtu Set the metric value to give the redistributed routes (for
EIGRP only):
•
bandwidth —Metric value or IGRP bandwidth of the
route in kilobits per second in the range 0 to
4294967295
• delay —Route delay in tens of microseconds in the
range 0 to 4294967295.
•
reliability —Likelihood of successful packet
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability and 0
means no reliability.
• loading — Effective bandwidth of the route expressed
as a number from 0 to 255 (255 is 100 percent
loading).
•
mtu —Minimum maximum transmission unit (MTU)
size of the route in bytes in the range 0 to
4294967295.
Step 19 set metric-type { type-1 | type-2 } Set the OSPF external metric type for redistributed routes.
Step 20
set metric-type internal Set the multi-exit discriminator (MED) value on prefixes
advertised to external BGP neighbor to match the IGP
metric of the next hop.
Step 21
set weight Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Step 22 end Return to privileged EXEC mode.
Step 23 show route-map Display all route maps configured or only the one
specified to verify configuration.
Step 24
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose