Cisco 3750G - Catalyst Integrated Wireless LAN Controller, Руководство по настройке

Страница: 105 / 1204

3-13
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 3 Assigning the Switch IP Address and Default Gateway
Modifying the Startup Configuration
Note This command only works properly from a standalone switch.
Beginning in privileged EXEC mode, follow these steps to specify a different configuration filename:
To return to the default setting, use the no boot config-file global configuration command.
Booting Manually
By default, the switch automatically boots; however, you can configure it to manually boot.
Note
This command only works properly from a standalone switch.
Beginning in privileged EXEC mode, follow these steps to configure the switch to manually boot during
the next boot cycle:
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2 boot config-file flash:/ file-url Specify the configuration file to load during the next boot cycle.
For file-url , specify the path (directory) and the configuration
filename.
Filenames and directory names are case sensitive.
Step 3 end Return to privileged EXEC mode.
Step 4 show boot Verify your entries.
The boot config-file global configuration command changes the
setting of the CONFIG_FILE environment variable.
Step 5 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2 boot manual Enable the switch to manually boot during the next boot cycle.
Step 3 end Return to privileged EXEC mode.