Atmel ATSAML22G16A-AUT, Руководство пользователя

Страница: 557 / 1231

29.8.7. Data Output Value Set
This register allows the user to set one or more output I/O pin drive levels high, without doing a read-
modify-write operation. Changes in this register will also be reflected in the Data Output Value (OUT),
Data Output Value Toggle (OUTTGL) and Data Output Value Clear (OUTCLR) registers.
Name: OUTSET
Offset: 0x18
Reset: 0x00000000
Property:
PAC Write-Protection
Bit 31 30 29 28 27 26 25 24
OUTSET[31:24]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
OUTSET[23:16]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
OUTSET[15:8]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
OUTSET[7:0]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 31:0 – OUTSET[31:0]: PORT Data Output Value Set
Writing '0' to a bit has no effect.
Writing '1' to a bit will set the corresponding bit in the OUT register, which sets the output drive level high
for I/O pins configured as outputs via the Data Direction register (DIR). For pins configured as inputs via
Data Direction register (DIR) with pull enabled via the Pull Enable register (PULLEN), these bits will set
the input pull direction to an internal pull-up.
Value Description
0 The corresponding I/O pin in the group will keep its configuration.
1 The corresponding I/O pin output is driven high, or the input is connected to an internal pull-
up.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
557