manualshive.com logo in svg

Atmel ATSAML22G16A-AUT, Руководство пользователя

Atmel ATSAML22G16A-AUT - это микроконтроллер с широкими возможностями и высокой производительностью. Загрузите его бесплатное руководство по эксплуатации с нашего сайта для получения подробной информации о его функциональности. Получите доступ к руководству по эксплуатации на manualshive.com.

Поделиться
Скачать
background image

The increment event action can be selected in the Event Control register (EVCTRL.EVACT0=0x4, INC)
and can change the counter state when an event is received. When the TCE0 event (TCCx_EV0) is
received, the counter increments, whatever the direction setting (CTRLBSET.DIR or CTRLBCLR.DIR) is.

Decrement Event Action

The decrement event action can be selected in the Event Control register (EVCTRL.EVACT1=0x4, DEC)
and can change the counter state when an event is received. When the TCE1 (TCCx_EV1) event is
received, the counter decrements, whatever the direction setting (CTRLBSET.DIR or CTRLBCLR.DIR) is.

Non-recoverable Fault Event Action

Non-recoverable fault actions can be selected in the Event Control register (EVCTRL.EVACTn=0x7,
FAULT). When received, the counter will be stopped and the output of the compare channels is
overridden according to the Driver Control register settings (DRVCTRL.NREx and DRVCTRL.NRVx).
TCE0 and TCE1 must be configured as asynchronous events.

Event Action Off

If the event action is disabled (EVCTRL.EVACTn=0x0, OFF), enabling the counter will also start the
counter.

36.6.2.5.  Compare Operations

By default, the Compare/Capture channel is configured for compare operations. To perform capture
operations, it must be re-configured.

When using the TCC with the Compare/Capture Value registers (CCx) for compare operations, the
counter value is continuously compared to the values in the CCx registers. This can be used for timer or
for waveform operation.

The Channel x Compare/Capture Buffer Value (CCBUFx) registers provide double buffer capability. The
double buffering synchronizes the update of the CCx register with the buffer value at the UPDATE
condition or a force update command (CTRLBSET.CMD=0x3, UPDATE). For further details, refer to 

Double Buffering

. The synchronization prevents the occurrence of odd-length, non-symmetrical pulses

and ensures glitch-free output.

Waveform Output Generation Operations

The compare channels can be used for waveform generation on output port pins. To make the waveform
available on the connected pin, the following requirements must be fulfilled:

1.

Choose a waveform generation mode in the Waveform Generation Operation bit in Waveform
register (WAVE.WAVEGEN).

2.

Optionally invert the waveform output WO[x] by writing the corresponding Waveform Output x
Inversion bit in the Driver Control register (DRVCTRL.INVENx).

3.

Configure the pins with the I/O Pin Controller. Refer to 

PORT - I/O Pin Controller

 for details.

The counter value is continuously compared with each CCx value. On a comparison match, the Match or
Capture Channel x bit in the Interrupt Flag Status and Clear register (INTFLAG.MCx) will be set on the
next zero-to-one transition of CLK_TCC_COUNT (see Normal Frequency Operation). An interrupt and/or
event can be generated on the same condition if Match/Capture occurs, i.e. INTENSET.MCx and/or
EVCTRL.MCEOx is '1'. Both interrupt and event can be generated simultaneously.

There are seven waveform configurations for the Waveform Generation Operation bit group in the
Waveform register (WAVE.WAVEGEN). This will influence how the waveform is generated and impose
restrictions on the top value. The configurations are:

•

Normal Frequency (NFRQ)

•

Match Frequency (MFRQ)

Atmel SAM L22G / L22J / L22N [DATASHEET]

Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016

803

Содержание ATSAML22G16A-AUT
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ATSAML22G16A-AUT

Kamstrup M-Bus Manual preview
M-Bus
Бренд: Kamstrup Страницы: 36
ITALFARAD RC4 Operating Instructions Manual preview
RC4
Бренд: ITALFARAD Страницы: 32
S.E.A. Group Sundstrom SR307 Manual preview
Sundstrom SR307
Бренд: S.E.A. Group Страницы: 5
Encelium Wired Manager - DALI Installation Instructions Manual preview
Wired Manager - DALI
Бренд: Encelium Страницы: 8
Zennio MAXinBOX 24 ZIO-MB24 User Manual preview
MAXinBOX 24 ZIO-MB24
Бренд: Zennio Страницы: 24
G-Scale Graphics railboss 4 Operation And Installtion Manual preview
railboss 4
Бренд: G-Scale Graphics Страницы: 12
Sices GC315 User And Installation Manual preview
GC315
Бренд: Sices Страницы: 8
QSC TSC-50-G3 User Manual preview
TSC-50-G3
Бренд: QSC Страницы: 13
GAC ACE295 Series Quick Manual preview
ACE295 Series
Бренд: GAC Страницы: 4
Hanna Instruments HI 9912 Instruction Manual preview
HI 9912
Бренд: Hanna Instruments Страницы: 28
Bard CompleteStat CS9B-THOA Quick Start Manual preview
CompleteStat CS9B-THOA
Бренд: Bard Страницы: 10
Oase InScenio Operating Instructions Manual preview
InScenio
Бренд: Oase Страницы: 646
Sensibo Sensibo Air Manual preview
Sensibo Air
Бренд: Sensibo Страницы: 15
Resol DeltaSol SLL Installation, Operation, Maintenance Manual preview
DeltaSol SLL
Бренд: Resol Страницы: 60
National Instruments cRIO-9031 Getting Started Manual preview
cRIO-9031
Бренд: National Instruments Страницы: 18
Zennio Securel v2 User Manual preview
Securel v2
Бренд: Zennio Страницы: 13
Akytec TRM210 User Manual preview
TRM210
Бренд: Akytec Страницы: 40
Armacost Lighting Proline 713420 Quick Start Manual preview
Proline 713420
Бренд: Armacost Lighting Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды