Atmel ATSAML22G16A-AUT, Руководство пользователя

Страница: 555 / 1231

29.8.5. Data Output Value
This register sets the data output drive value for the individual I/O pins in the PORT.
This register can be manipulated without doing a read-modify-write operation by using the Data Output
Value Clear (OUTCLR), Data Output Value Set (OUTSET), and Data Output Value Toggle (OUTTGL)
registers.
Name: OUT
Offset: 0x10
Reset: 0x00000000
Property:
PAC Write-Protection
Bit 31 30 29 28 27 26 25 24
OUT[31:24]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
OUT[23:16]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
OUT[15:8]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
OUT[7:0]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 31:0 – OUT[31:0]: Port Data Output Value
For pins configured as outputs via the Data Direction register (DIR), these bits set the logical output drive
level.
For pins configured as inputs via the Data Direction register (DIR) and with pull enabled via the Pull
Enable bit in the Pin Configuration register (PINCFG.PULLEN), these bits will set the input pull direction.
Value Description
0 The I/O pin output is driven low, or the input is connected to an internal pull-down.
1 The I/O pin output is driven high, or the input is connected to an internal pull-up.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
555