PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
42
-
4.2.
Command Usage
The operator can use all commands of the VOICEFINDER AP2520 Gateway
through the consol or Telnet terminal (VTY100 terminal.)
There are three kinds of commands – commands of the user mode, commands
of the manager mode and commands of the configuration mode.
Commands of the user mode enable the operator to check limited information
of the system and provide a connection function for data communication.
Commands of the manager mode enable the operator to check configuration
status of the Gateway and perform debugging. And commands of the
configuration mode enable the operator to change configuration
environment and set new environment.
The PassFinder AP2520 Gateway has following features regarding operator’s
entering commands.
z
Although the operator enters only a part of the command, the PassFinder
AP2520 Gateway automatically recognizes the whole command. For
example, if the operator enters only “sh” or “sho” instead of “show” the
PassFinder AP2520 Gateway automatically recognizes “sh” or “sho” as
“show.”
z
The PassFinder AP2520 Gateway provides an online help function so the
user can check corresponding items for the command and command
syntax.
z
The PassFinder AP2520 Gateway provides "More" function that divides a
long message into several messages so that the operator can see the
whole message by scrolling the screen.
z
The PassFinder AP2520 Gateway provides Help and “?” functions to display
