PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
83
-
z
frame-relay parameter
Enters into the parameter setting mode of the frame-relay BECN and CIR.
z
becn-enable
Enable the Becn function in the frame-relay parameter configuration
mode.
z
bc
{
in / out
} <
bc-value
>
Sets the committed burts size to input or output the corresponding port in
the frame-relay parameter configuration mode.
z
be
{
in / out
} <
be-value
>
Sets the excess burst size in the frame-relay parameter configuration mode
to input or output the corresponding port.
z
cir
{
in / out
} <
cir-value
>
Sets the committed information rate to input or output the corresponding
port in the frame-relay parameter configuration mode.
z
mincir
{
in / out
} <
mincir-value
>
Sets the minimum acceptable CIR to input or output the corresponding
port in the frame-relay parameter configuration mode.
z
frame-relay lmi-type
{
ansi/q.933a
} (To be implemented)
1.
Sets the LMI type of the frame relay. (The default is ANSI.)
2.
“q.933a” is an LMI for the frame-relay SVC service.
z
frame-relay switching
(To be implemented)
Sets the router as a frame-relay switch. (An optional command to set the
router as a frame-relay PVC switch.)
z
frame-relay route
<
in-dlci
> <
out-interface
> <
out-dlci
> (To be implemented)
Routes the frame that came to the <In-DLCI> of the switch to the
<Out-DLCI> of the <Out-Interface> when the router functions as a
frame-relay switch.
