PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
177
-
POTS Peer and VoIP Peer with destination pattern of Dial Peer, Inbound Dial
Peer is decided by other ways.
First of all, the procedure of Inbound POTS Peer is as follows;
z
Select POT peer assigned by voice port receiving Call.
z
In case more than one POTS peer are assigned by voice port, the POT
made at first gets selected.
The procedure of selection for VoIP is as follows;
z
Select VoIP peer having the same IP address with receiving Router among
VoIP peers.
z
When the above selection fails, Select VoIP peer having answer-address
which is matched with calling party number of Inbound call.
z
When the above selection fails, Select VoIP peer having destination-pattern
which is matched with calling party number of Inbound call.
The selection of Inbound Dial Peer is a proper measurement for receiving side.
That is, parameters assigned by POTS or VoIP peer applies to the elected dial
Peer. Ultimately, because the failure of the selection for VoIP means POTS
peer related to choice port doesn’t exist, Call doesn’t advance. Meanwhile
Inbound VoIP peer will proceed regardless of the selection of Inbound VoIP
peer.
