PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
117
-
z
nat
<
nat-list-number
>
pat
<
pat-address
>
1.
Sets the PAT list to use PAT in the global configuration location and PAT
address.
2.
NAT-list-number: Define any number between 0 and 7.
z
nat
<
nat-list-number
>
pat
static-entry { tcp/udp }
<
udp-port-number
>
<
IP-address for PAT
> <
IP-address for PAT
>………<
IP-address for PAT
>
1.
To Application such as Dial Pad, this command statically sets PAT
translation between a certain port number and the IP address.
2.
NAT-list-number: Define any number between 0 and 7.
3.
Static-entry for TCP is to be implemented during the latter half of 2000.
4.
IP-Address for PAT: The address of a terminal whose port shall be
statically set. IP-Address for PAT is one of local inner network addresses.
As using this command, the user can set several IPs at the same time.
z
nat
<
nat-list-number
>
pat
{
fin-timeout / icmp-timeout / syn-timeout /
tcp-timeout / udp-timeout
} <
timeout-value
>
1.
Selects options for timeout value when the session is in idle status during
PAT conversion.
2.
Details of each option are as follows:
1)
Fin-timeout: Sets timeout after TCP Fin. The default is 10 seconds.
2)
icmp-timeout: Sets timeout after ICMP Session Idle. The default is 60
seconds.
3)
sys-timeout: Sets timeout after TCP sync Idle. The default is 60
seconds.
4)
tcp-timeout: Sets timeout after TCP Session Idle. The default is 3,600
seconds.
5)
udp-timeout: Sets timeout after UDP Session Idle. The default is 60
seconds.
z
show nat-list
[nat-list-number]
1.
Shows NAT-list that has been set.
2.
If no NAT-List-Number is designated, this command will show status of all
NATs.
