PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
81
-
[Related Commands and Syntax]
z
interface
{
Ethernet /serial
} {
0 / 1
}
Selects the serial interface, and enters into the interface configuration
mode.
z
interface
{
Ethernet /serial
} <
X.Y
>
1.
Selects the serial interface, sets the sub-interface for the selected serial
interface, and enters into the interface configuration mode. (X: Main
interface number, Y: Sub-interface number for the selected interface)
2.
The sub-interface of the PassFinder AP2520 router shall support only the
point-to-point feature. To use the multipoint feature, the operator
needs to use the main interface.
3.
An optional command to use a sub-interface.
4.
The sub-interface is supported only when the frame-relay encapsulation
is used in the serial line.
z
encapsulation
{
hdlc / ppp / frame-relay
}
Sets the serial mode for the interface. The PassFinder AP2520 router
supports only IETF encapsulation for the frame-relay encapsulation type.
z
ip address
<
ip_address
> <
net_mask
>
Sets the IP address for the interface.
z
frame-relay map
{
ip/bridge
} [
ptotocol_address
] <
dlci #
>
1.
Statically maps the next-hop protocol address and the DLCI number
according to that address.
2.
For the bridge option using method, see “Bridging Configuration.”
3.
No static map can be used as long as a sub-interface is used. In this
case, use “frame-relay interface-dlci < dlci-number >” command.
z
frame-relay interface-dlci
<
dlci_number
>
1.
With the inverse-ARP of the frame relay, this command dynamically
maps next-hop protocol address and the DLCI number that is used to
