PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
58
-
[Procedure]
Step
Operation
1
Enter into the interface configuration mode.
2
Give PPP encapsulation protocol to the interface.
3
Move to the IP configuration mode.
4
Give an IP address to the interface.
5
Enable CHAP or PAP authentication. (Optional)
6
Set CHAP or PAP parameters. (Optional)
7
Set PPP default peer IP. (Optional)
8
(If necessary) use “debug” command to check if the Gateway is
normally operating.
9
Make the interface up.
10
With “show interface” command, check if the interface is normally
operating.
11
(For abnormal operation) find faults and recover faults as using
“debug” command.
[Related Commands and Syntax]
z
interface
{
Ethernet / serial
} {
0 / 1
}
Selects the interface to set up and enters into the interface configuration
mode.
z
encapsulation
{
hdlc / ppp / frame-relay
}
Sets the serial encapsulation mode for the interface.
z
Ip
address
<
ip_address
> <
net_mask
>
Selects the corresponding interface and enters into the IP related
configuration mode.
z
user add
<username> <password> {
admin/high/normal/low
}
1.
Sets the login name and the password to authenticate a Gateway that
is trying to access to another Gateway that function as a PPP
PAP/CHAP server.
