PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
125
-
[Procedure-DHCP Server]
Step
Operation
1
Move to the configuration mode.
2
Define the DHCP-list type to use in the Gateway.
3
Create a DHCP-list defining DHCP-list number, DHCP mode to use in
the Gateway, or DHCP address pool.
9
If the server type is DHCP, set a DHCP pool that defines the
DHCP start-address and the DHCP end-address.
9
If the server type is DHCP, set a DHCP pool that defines the
DHCP start-address and the DHCP end-address.
4
Set other DHCPs and other necessary options.
5
Go to the interface configuration mode.
6
Enter into the IP configuration mode.
7
Apply the DHCP-list that has been set to the corresponding interface.
8
Use “Show dhcp-list” to check if desired DHCP has been correctly set.
[Procedure – DHCP Client ]
순서
작업
내용
Description
1
Move to the configuration mode.
2
Select the interface configure as a DHCP Client
3
Apply the DHCP-Client instead of IP Address to the corresponding
interface
[Related Commands and Syntax]
Mandatory Commands
z
dhcp-list
<
dhcp-list-number
>
type
{
server/relay
}
Creates the DHCP list of the Gateway (dhcp-list-number: any number
between 0 and 4) and sets DHCP in the list should function as a server or
protocol relay.
