PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
170
-
There are basically two different kinds of dial peers with each voice
implementation:
z
POTS Dial peer : POTS Dial peer describing the characteristics of a
traditional telephony network connection. POTS peers point to a particular
voice port on a voice network device.
When configuring POTS dial peers, the key commands that must be
configured are the
port
and
destination-pattern
commands. The
destination-pattern
command defines the telephone number associated
with the POTS dial peer. The
port
command associates the POTS dial peer
with a specific logical dial interface, normally the voice port connecting
the AP2520 VoIP Gateway to the local POTS network.
When configuring Voice over IP on the AP2520 VoIP Gateway, direct
inward dial can be configured on a POTS dial peer. In this case, the key
commands that must be configured are the
destination-pattern
and
direct-inward-dial
commands.
z
Voice Network Dial peer : Voice Network Dial peer describing the
characteristics of a packet network connection; for example, in the case of
Voice over IP, this is an IP network. Voice-network peers point to specific
voice-network devices.
When configuring voice-network dial peers, the key commands that must
be configured are the
destination-pattern
and
session-target
commands.
The
destination-pattern
command defines the telephone number
associated with the voice-network dial peer. The
session-target
command
specifies a destination address for the voice-network peer.
If configuring a Voice over IP network peer, the session target is a
destination IP address.
