PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
141
-
4.12.
Gateway Management Command
This chapter describers commands used in the EXEC mode or the global
configuration mode and necessary for management and operation of the
Gateway in an alphabetical order. For commands regarding special
configuration of the Gateway, refer to the previous chapters.
4.12.1.
Command in the EXEC Mode
[Command Formats and Optional Commands]
z
clear { counters/interface/logging/utilization }
1.
Resets certain functions or certain parts of the Gateway.
2.
Command options are as follows:
1)
counters: Clears counters of all interfaces.
2)
interface: Resets the hardware logic of a certain interface and
functions as if rebooting certain interfaces.
3)
logging: Clears logging buffer. To be implemented later.
4)
utilization: Clears system utilization information of the Gateway.
z
clock [
current/running/start ]
1.
Shows the system clock of the Gateway.
2.
Command options
1)
current: Shows current time of the Gateway.
2)
running: Shows total running time.
3)
start: Shows the time that the Gateway started operating.
3.
If there is no option, all values of the three options will be displayed.
z
configuration
Enters into the configuration mode.
