Zero 88 ORB, Operating Manual

Page: 14 / 163

Introduction
Page 14 ORB Operating Manual – Issue 1.0
Keypads & Syntax Keys
Figure 6 - Keypads & Syntax Keys
The / key is used for
separating cue & stack
numbers, or fade up/down
times.
The ENTER key is used
for confirming or
completing commands.
The FULL key is used to set
the intensity of the selected
fixture(s) to FULL (ie
100%).
The numeric keys (0 - 9) and
the point key (.) are used for
entering numeric data (eg
group no, palette no, cue no,
channel levels, DMX
addresses etc.)
The backspace key (

)
removes the last
instruction entered on the
command line.
The EXCEPT key is used
for removing items from
a list.
The AND key is
used for adding
items to a list.
The syntax keys follow
syntax and provide
additional functions
according to what you’ve
entered.
The THRU key is
used for selecting a
range of items.
The + and – keys
are used for relative
adjustment of levels
(@+10 ENTER)
The SHIFT key
alters the function
of most keys on the
desk.
The . key is used to indicate
decimal points in cue names and
in syntax for setting 0% intensity
The MACRO key allows
you to record and run
macros to speed up
programming.
The UNDO key
undoes the last
command entered.
The AT (@) key is used
when setting intensity
levels or DMX
addresses.