Setup
ORB Operating Manual – Issue 1.0
Page 39
Patch Wizard
The Patch Wizard guides you through the entire patching process,
and is a faster way of getting a simple patch up and running than
using Add Fixtures and Patching through syntax. However, the
Patch Wizard makes the assumption that your rig has been patched
sequentially and can be slower for complicated patch entry.
To use the Patch Wizard, press the [Patch Wizard] button on the
monitor. The Patch Wizard will appear and guide you through
adding some fixtures.
Figure 28 – Patch Wizard (Step 1 – Manufacturer Selection)
First the wizard allows you to select the fixture manufacturer.
Scroll down or use the cursor keys to select the required
manufacturer (eg MARTIN). If you have a keyboard connected, you
can press the M key to jump straight to manufacturers beginning
with M.
Standard Dimmers can be patched using the <Standard Fixtures>
type, which is also where you will find fixtures such as RGB
Dimmers (for LEDs), Scrollers and Relays.
Press the [Next] button to move to the next step.
Figure 29 – Patch Wizard (Step 2 – Fixture Selection)
Scroll down or use the cursor keys to select the required fixture
type (eg MAC 700 Profile).
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
