User Definable Keys (UDKs)
ORB Operating Manual – Issue 1.0
Page 103
Each of these buttons shows the UDK number and information on
the item assigned to the UDK (if any).
The buttons in the UDK window can be used in the same way as the
front panel controls, which makes them ideal for placing on a
touchscreen for fast playback.
Editing User Definable Keys
To edit a UDK enter the following command:
LOAD <UDK>.
This allows you to load the contents of the UDK into the
programmer, adjust the programmed channel levels and times as
required and then save the data back into the original UDK by
pressing the UPDATE key.
Note - This function only applies to UDKs which have been assigned
to channel data or a cue. In the case of a cue, you effectively load
the cue into the programmer, modify it and update it.
Alternatively you can use the UPDATE functionality to UPDATE a
UDK through the Update Options Window. See page 78 for more
information.
Deleting User Definable Keys
Individual UDK’s can be deleted (cleared) by entering the following
command:
DELETE <UDK>
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
