Setup
ORB Operating Manual – Issue 1.0
Page 37
Patch Views
The Patch Window can display the patch data in three different
views on the monitor (Outputs, Fixtures and Channels). The default
view is the Outputs view (see below).
Press the [Patch View] key in the Patch Window and then select
[Outputs], [Fixtures] or [Channels] from the drop down menu. The
different patch views are described in the sections below.
Outputs View
This is the default patch view and displays the DMX start address
for each fixture for each DMX universe. The 4 universes are
displayed vertically with each fixture listed according to its outputs.
Figure 25 – Outputs View
Fixtures View
This patch view lists all the fixtures in the schedule together with
their alignment data and DMX patch address(es).
The fixtures are listed in group order. Alignment data is only
displayed if it has been changed from the defaults. Patch addresses
are displayed in the format universe/address in normal addressing
mode or simply the address in absolute addressing mode.
Figure 26 – Fixtures View
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
