Zero 88 ORB, Operating Manual

Page: 42 / 163

Setup
Page 42 ORB Operating Manual – Issue 1.0
Editing Fixtures
Edit Fixtures allows you to carry out various functions relating to the
fixtures assigned to the desk, including :
•
Name individual fixtures
•
Assign user fixture numbers
• Edit fixture parameter Default (release) values
• Edit fixture parameter Home values
•
Edit fixture parameter Topset values
•
Adjust the Pan and Tilt alignment of fixtures
• Patch Functions
The behaviour of each of these functions is described in this
chapter.
To enter Edit Fixtures, press the [Edit Fixtures] button on the
monitor. The Edit Fixtures screen is then displayed.
To make changes to a particular fixture or a group of fixtures, first
select the fixture group by pressing the GROUP button repeatedly
until the required group is displayed in the title bar. All the fixtures
in this group are now displayed in the Edit Fixtures window.
Press the [Default], [Home], [Topset] etc button to display the
required data. Use the cursor keys to move to the individual field to
edit or use the ALL row to select the value for all fixtures in the
group. Press ENTER to enter the field, adjust the value as required,
then press the ENTER key.
Figure 33 - Edit Fixtures
Once all changes have been made, press the [OK] key to return to
the Patch screen.
If you make a mistake in Edit Fixtures, or simply wish to revert to
the original values from the fixture library then press the [Reset All]
key. If you wish to cancel all editing of the fixtures, press the
[Cancel] key.