Introduction
Page 16
ORB Operating Manual – Issue 1.0
Attribute & Cursor Keys and Control Wheels
Figure 8 – Attribute & Cursor Keys & Control Wheels
The attribute keys (POSITION,
COLOUR, BEAM and EFFECTS) are
used when adjusting fixture
parameters and also when
recording, referencing and
outputting palettes and effects.
Each of these keys contains a
yellow light, which is lit when the
attribute is selected.
The arrow keys are used to
move around fields on the
active monitor screen.
The Intensity wheel is used for
adjusting the intensity of the
currently selected fixture(s). The
intensity level is displayed on the LCD
screen above the wheel.
The trackball and three
trackball buttons are used
for manipulating the mouse
on the monitor screens, and
also for Position control of
moving lights. See page 134
for more information.
The MORE key pages
the SYNTAX KEYS to
display more options.
The three control wheels are used
for setting and adjusting fixture
parameter and other data levels.
The parameters that are currently
assigned to the control wheels
are shown on the LCD, together
with their current value.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
