Quick Start Tutorial
Page 18
ORB Operating Manual – Issue 1.0
Scroll down or use the cursor keys to select the required
manufacturer (eg MARTIN). If you have a keyboard connected, you
can press the M key to jump straight to manufacturers beginning
with M.
Press the [Next] button to move to the next step.
Figure 10 – Patch Wizard (Step 2 – Fixture Selection)
Scroll down or use the cursor keys to select the required fixture
type (eg MAC 700 Profile).
Note – Fixture Types
If the fixture type you require is not in the fixture library stored on
the desk you can import the fixture type – see Setup chapter for full
details.
Press the [Next] button to select the fixture Mode. It is important
that the mode set here matches the mode set on the fixture itself –
if in doubt, consult the fixture operating manual for full details.
Figure 11 – Patch Wizard (Step 3 – Mode Selection)
Once the Mode has been selected, press the [Next] button to move
on and enter the DMX address for the fixture. If you have not yet
set this on the fixtures themselves, press the [Next Address] button
and the desk will calculate a DMX address for you based on the
existing patch information.
It is important here to ensure that the DMX universe is correctly
selected.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
