Setup
ORB Operating Manual – Issue 1.0
Page 59
Files
This section of Setup allows you to save and load show files and to
load or clear User Fixtures (UFTs). Each section of the Files menu is
accessed through a button on the monitor.
Saving Shows
To save a copy of your show, you first need a storage media. The
ORB is supplied with a 1GB USB flash memory stick, although other
storage media may be used with the console. Connect your media
to the USB port on the desk (any port will do). If using an external
floppy drive, remember to insert a floppy disk into the drive.
Press the [Files] button on the monitor.
Press the [Save Show] button on the monitor. The Save Show
window is displayed:
Figure 48 - Save Show
•
Select the desired storage device by pressing the
[Destination Device] key. This cycles through all the
available devices; select the one you require. If the drive
doesn’t appear in the list, press [Refresh] after a couple of
seconds.
•
Select the Filename field and enter a name for the show file.
This name will be used as the file name on the destination
device, so ensure it is unique and easily identifiable.
•
Select the [Save Complete Show] box and toggle it until it
displays the option you require. The ORB allows you to save
just the Setup, the Setup and Palettes, or the Complete
show.
•
Press the [OK] button to save the show.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
