Zero 88 ORB, Operating Manual

Page: 136 / 163

Technical Specification
Page 136 ORB Operating Manual – Issue 1.0
Technical Specification
Mains Inlet
The desk is fitted with an IEC320-C14 Mains Inlet and power on/off
switch on the back panel.
90-264V AC ONLY
47-63Hz, 200VA (2A)
INTERNALLY FUSED. A GOOD EARTH CONNECTION IS ESSENTIAL
The internal fuse is not user replaceable, contact an authorised
service agent if the desk does not power up and you suspect that
the fuse has failed.
The ORB is supplied with a bare ended mains lead, which should be
connected as follows:
Brown:
Live (Hot)
Blue: Neutral
Green/Yellow: Earth
The supply cord must be protected to a maximum current of 10A. If
in doubt consult a qualified electrician.
Audio
The desk has three audio ports on the rear panel (line in, line out
and sound to light input) as stereo ¼ inch jack sockets.
• The line in and out functions are not currently
implemented in software.
Connections
Tip Left Channel
Ring Right Channel
Sleeve
0V Signal
Ground
Remote Input
An 8 pin DIN connector providing 6 remote switches (common
ground). Short pin to 0v to simulate a button push.
Warning – Do NOT connect anything to the undefined pin.
Socket Pin Remote Switch
1 Switch 6
2 Switch 1
3 Switch 2
4 Switch 3
5 Switch 4
6 Switch 5
7 Not Used
8 0V Common Ground