Quick Start Tutorial
ORB Operating Manual – Issue 1.0
Page 19
Figure 12 – Patch Wizard (Step 4 – DMX Address entry)
Once the address is configured, press the [Next] button and enter
the quantity of the fixture required. The monitor screen will tell you
the number of fixtures and control channels remaining within its
limits, to ensure you do not exceed these limits.
The final step in the Patch Wizard is to assign a fixture number to
the fixtures. The fixture number is the number you will refer to the
fixture as within the desk software. Enter the number and press
[Finish].
Figure 13 – Patch Wizard (Step 4 – Quantity)
The Patch Wizard is now complete and your fixtures have been
assigned. If everything has gone according to plan, the fixtures
should now have moved to their Home positions.
You can repeat the Patch Wizard for every group of fixtures you
have.
Exiting Setup
Once you have finished making changes to the setup, press the
[SETUP] leave Setup. The indicator light will go out to inform you
that you have exited Setup mode.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
