Zero 88 ORB, Operating Manual

Page: 119 / 163

Advanced Programming
ORB Operating Manual – Issue 1.0 Page 119
selected fixtures will increase or decrease by the same amount from
its original value. This mode is most often used for adjusting
position parameters (pan and tilt) For example:
Fixture
Parameter
Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 10 20 30 40 50
New Value 15 25 35 45 55
Change in Value +5 +5 +5 +5 +5
Fan First Mode
When several fixtures are selected and a fixture parameter is
adjusted using a control wheel, that parameter on each of the
selected fixtures will increase or decrease by a different amount
from their original values, depending on the fixture number. The
value of the first selected fixture will be locked. Example – Fan-First
Mode (Fixture 1 locked):
Fixture
Parameter
Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 10 10 10 10 10
New Value 10 15 20 25 30
Change in Value 0 +5 +10 +15 +20
Fan Middle Mode
When several fixtures are selected and a fixture parameter is
adjusted using a control wheel, that parameter on each of the
selected fixtures will increase or decrease by a different amount
from their original values, depending on the fixture number. The
value of the middle selected fixture will be locked. Example – Fan-
Middle Mode (Fixture 3 locked):
Fixture
Parameter
Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 50 50 50 50 50
New Value 40 45 50 55 60
Change in Value -10 -5 0 +5 +10
Fan Last Mode
When several fixtures are selected and a fixture parameter is
adjusted using a control wheel, that parameter on each of the
selected fixtures will increase or decrease by a different amount
from their original values, depending on the fixture number. The
value of the last selected fixture will be locked. Example – Fan-Last
Mode (Fixture 5 locked):
Fixture
Parameter
Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 50 50 50 50 50
New Value 30 35 40 45 50
Change in Value -20 -15 -10 -5 0
Fan V Mode
When several fixtures are selected and a fixture parameter is
adjusted using a control wheel, that parameter on each of the
selected fixtures will increase or decrease by a different amount
from their original values, depending on the fixture number.
The value of the middle selected fixture will be locked. The fixtures
either side of the middle fixture will be set to the same values to
create a ‘V’. Example – Fan V Mode (Fixture 3 locked):
Fixture
Parameter
Fixture 1 Fixture 2 Fixture 3 Fixture 4 Fixture 5
Original Value 50 50 50 50 50
New Value 70 60 50 60 70
Change in Value +20 +10 0 +10 +20