Quick Start Tutorial
ORB Operating Manual – Issue 1.0
Page 29
Saving Shows
The ORB will save the show automatically to its internal memory at
regular intervals.
External backups of the show data can be made to a USB Storage
Device (eg the memory stick included with your ORB).
•
Saving the show is done in Setup mode, so first press SETUP
•
Press the [Files] key on the monitor.
•
Press the [Save Show] key to enter the Save Show screen.
•
Press the Destination Device key to select the required
device.
•
If the device does not appear straight away, wait a few
seconds and then click [Refresh].
•
Type the show name in the Filename box using an external
keyboard or the numeric keypad on the desk.
•
Press the [OK] key.
•
After a few seconds, the show will be saved.
•
Press SETUP to exit Setup mode.
Saving the show takes all of the available information in the desk,
including monitor configurations, setup options, patch, cue and
palette data and stores it all into a single file on your destination
device. This file can then be reloaded at a later date to return the
desk to the same state as it was in when you saved it.
Figure 19 – Save Show
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
