Introduction
ORB Operating Manual – Issue 1.0
Page 13
Function Keypad
Figure 5 - Function Keypad
COPY TO & MOVE TO are
used to relocate and copy
data from one place to
another.
DELETE is used to
remove
programmed items.
CUE ONLY is used when
programming to prevent
the changes in a cue
applying to later cues.
TIME and DELAY
are used to adjust
the fade and delay
times.
BLIND allows you to
enter and leave
BLIND mode, which
can be used for
adjusting cues
without affecting the
output of the desk.
SMART TAG allows you to engage
the Smart Tags function to
automatically tag required channels.
TRACK allows you to
record cues tracking
forwards from that
point.
UPDATE allows you to
merge new information
into existing data
NAME is used to set
a name on any
programmed item.
RECORD is used
to store an item.
GROUP specifies a range of
channels to be controlled
together.
CUE & SUB allow you to
specify a particular cue or
submaster to record or alter.
LOAD allows you to bring back
a programmed item into the
programmer for alteration.
SETUP is used to enter and
exit SETUP, and to configure
programmed items.
VIEW allows you to alter
the monitor screen
layouts and recall
programmed views.
TRY CUE lets you try
out a crossfade before
programming the cue.
The CLEAR key is
used to clear out data
from the programmer,
releasing those
channels from control.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
