Yamaha Tenere 700 2020, Service Manual

Page: 316 / 472

IGNITION SYSTEM
8-5
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
8. Check the engine stop switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129.
• The engine stop switch is faulty.
• Replace the right handlebar switch.
9. Check the gear position switch.
Refer to “CHECKING THE GEAR
POSITION SWITCH” on page
8-139.
Replace the gear position switch.
10.Check the sidestand switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129. Replace the sidestand switch.
11.Check the relay unit (diode).
Refer to “CHECKING THE RELAY
UNIT (DIODE)” on page 8-133. Replace the relay unit.
12.Check the lean angle sensor.
Refer to “CHECKING THE LEAN
ANGLE SENSOR” on page 8-136. Replace the lean angle sensor.
13.Check the entire ignition system
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-1. Properly connect or replace the wiring har-
ness.
Replace the ECU. Refer to “REPLAC-
ING THE ECU (engine control unit)”
on page 8-130.