Yamaha Tenere 700 2020, Service Manual

Page: 177 / 472

SWINGARM
4-78
EAS30228
INSTALLING THE SWINGARM
1. Lubricate:
• Oil seals
• Pivot shaft
2. Install:
• Bearings “1”
• Oil seals “2”
(to the swingarm “3”)
TIP
Install the bearings to the swingarm so that the
marks are facing outward.
3. Install:
• Adjusting bolt
(to the frame)
TIP
Temporarily tighten the adjusting bolt until its
flange contacts the frame.
4. Install:
• Swingarm
• Pivot shaft
5. Tighten:
• Adjusting bolt
TIP
• Tighten the adjusting bolt to specification with
the engine alignment tool “1”.
• Make sure that the flange on the adjusting bolt
contacts the dust cover on the swingarm.
Recommended lubricant
Lithium-soap-based grease
Installed depth “a”
28.3–29.7 mm (1.11–1.17 in)
Installed depth “b”
11.5–13.0 mm (0.45–0.51 in)
Installed depth “c”
24.3–25.7 mm (0.96–1.01 in)
Installed depth “d”
1.0 mm (0.04 in)
Installed depth “e”
8.0 mm (0.31 in)
Installed depth “f”
3.0 mm (0.12 in)
New
1
1
3
b
a
d
c
A C
B
2
New
2 New
A. Left side
B. Right side
C. Pivot shaft side
D. Connecting rod bolt side
Engine alignment tool
90890-11097
T
R
.
.
Adjusting bolt
7 N·m (0.7 kgf·m, 5.2 lb·ft)
1
e
f
A
B
2 New
3
D