Yamaha Tenere 700 2020, Service Manual

Page: 59 / 472

CABLE ROUTING
2-36
1. Radiator inlet hose
2. Radiator
3. Radiator outlet hose
4. Radiator cap
5. Coolant reservoir hose
A. Point the ends of the hose clamp inward. Make
sure that the ends of the hose clamp do not
contact the coolant reservoir hose. Position the
hose clamp 3 mm (0.12 in) or more away from the
end of the radiator inlet hose. Make sure not to
install the hose clamp on the raised portion of the
hose fitting.
B. Align the yellow paint mark on the radiator inlet
hose with the projection on the radiator pipe. Install
the radiator inlet hose onto the radiator pipe so that
the hose contacts the projection on the pipe.
C. Point the ends of the hose clamp rearward.
Position the hose clamp 3 mm (0.12 in) or more
away from the end of the coolant reservoir hose.
Make sure not to install the hose clamp on the
raised portion of the hose fitting.