Yamaha Tenere 700 2020, Service Manual

Page: 91 / 472

PERIODIC MAINTENANCE
3-26
7. Install:
• Oil pressure gauge “1”
• Adapter “2”
8. Stand the vehicle on a level surface.
TIP
• Place the vehicle on the suitable stand.
• Make sure that the vehicle is upright.
9. Measure:
• Engine oil pressure
(at the following conditions)
Out of specification
→
Check.
10.Install:
• Main gallery bolt
• O-ring
TIP
Lubricate the O-ring with a thin coat of lithium-
soap-based grease.
11.Install:
• Engine guard
EAS30811
CHECKING THE COOLANT LEVEL
1. Stand the vehicle on a level surface.
TIP
• Place the vehicle on a suitable stand.
• Make sure the vehicle is upright.
2. Check:
• Coolant level
The coolant level should be between the min-
imum level mark “a” and maximum level mark
“b”.
Below the minimum level mark
→
Add the
recommended coolant to the proper level.
NOTICE
ECA13470
• Adding water instead of coolant lowers the
antifreeze content of the coolant. If water is
used instead of coolant check, and if nec-
essary, correct the antifreeze concentra-
tion of the coolant.
Pressure gauge
90890-03153
Pressure gauge
YU-03153
Oil pressure adapter H
90890-03139
Oil pressure
280.0 kPa/5000 r/min (2.80 kgf/
cm²/5000 r/min, 40.6 psi/5000 r/
min)
Engine oil pressure Possible causes
Below specification
• Faulty oil pump
• Clogged oil filter
• Leaking oil passage
• Broken or damaged
oil seal
1
1
2
Above specification
• Leaking oil passage
• Faulty oil filter
• Oil viscosity too high
T
R
.
.
Main gallery bolt
8 N·m (0.8 kgf·m, 5.9 lb·ft)
T
R
.
.
Engine guard bolt
11 N·m (1.1 kgf·m, 8.1 lb·ft)
Engine oil pressure Possible causes
New
b
a