Yamaha Tenere 700 2020, Service Manual, Page: 88 / 472

PERIODIC MAINTENANCE
3-23
Rebound damping
NOTICE
ECA13590
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Rebound damping
a. Turn the adjusting screw “1” in direction
“a” or “b”.
TIP
To obtain a precise adjustment, it is advisable to
check the actual total number of turns of the
damping force adjusting mechanism. This ad-
justment range may not exactly match the spec-
ifications listed due to small differences in
production.
Compression damping
NOTICE
ECA13590
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Compression damping
a. Turn the adjusting screw “1” in direction
“a” or “b”.
TIP
To obtain a precise adjustment, it is advisable to
check the actual total number of turns of the
damping force adjusting mechanism. This ad-
justment range may not exactly match the spec-
ifications listed due to small differences in
production.
Direction “a”
Rebound damping is increased (sus-
pension is harder).
Direction “b”
Rebound damping is decreased (sus-
pension is softer).
Rebound damping
Adjustment value from the start
position (Soft)
23
Adjustment value from the start
position (STD)
13
Adjustment value from the start
position (Hard)
0
* With the adjusting screw fully turned in
direction “a”
1
b
a
Direction “a”
Compression damping is increased
(suspension is harder).
Direction “b”
Compression damping is decreased
(suspension is softer).
Compression damping
Adjustment value from the start
position (Soft)
18
Adjustment value from the start
position (STD)
15
Adjustment value from the start
position (Hard)
0
* With the adjusting screw fully turned in
direction “a”
1
b
a