Yamaha Tenere 700 2020, Service Manual

Page: 13 / 472

FEATURES
1-4
TIP
The ABS will be disabled until the key is turned
to “OFF”, or the engine stop switch is turned to
“
” (stop) when the engine is running or you
stop the vehicle and push the “OFF-ROAD ABS
ON/OFF” button again. The “ABS OFF” warning
light and the “OFF-ROAD” indicator will turn off.
WARNING
EWAM1050
Always ride on paved roads with the ABS
turned on. Riding on public roads with the
ABS disabled may be illegal and void your in-
surance. Turn the ABS off only when riding
on non-paved surfaces.
Multi-function display
The multi-function display can show:
• an odometer
• two tripmeters
• a countdown tripmeter
• a fuel reserve tripmeter
• an instantaneous fuel consumption display
• an average fuel consumption display
• a coolant temperature display
• an air temperature display
• a brightness control mode
The odometer shows the total distance the vehi-
cle has traveled. The standard tripmeters show
the distance traveled since they were last reset.
The countdown tripmeter shows the remaining
distance to travel since it was last set. The fuel
reserve tripmeter shows the distance traveled
since the last segment of the fuel meter began
flashing.
TIP
• The odometer will lock at 999999 and cannot
be reset.
• The tripmeter will reset to 0 and continue
counting after 9999.9 is reached.
• The countdown tripmeter does not automati-
cally reset.
Push the top set button to switch the display in
the following order:
ODO
→
TRIP 1
→
TRIP 2
→
TRIP CD
→
TRIP
F
→
km/L or L/100 km or MPG
→
AVE_ _._ km/
L or AVE_ _._ L/100 km or AVE_ _._ MPG
→
_
_ °C
→
Air_ _ °C
→
ODO
TIP
• Push the bottom set button to switch the dis-
play in the reverse order.
• The display changes to fuel reserve tripmeter
“TRIP F” when the last segment of the fuel me-
ter starts flashing.
• To reset a tripmeter, select it by pushing the
top set button, and while the digits flash, push
the bottom set button until it is reset.
• If you do not reset the fuel reserve tripmeter
manually, it will reset automatically and disap-
pear from the display after refueling and travel-
ing 5 km (3 mi).
Fuel reserve tripmeter
When the fuel level becomes low, the last seg-
ment of the fuel meter will start flashing. The fuel
reserve tripmeter “TRIP F” will automatically ap-
pear and start counting the distance traveled
from that point. In this case, push the top set but-
ton to switch the display in the following order:
TRIP F
→
km/L or L/100 km
→
AVE_ _._ km/L
or AVE_ _._ L/100 km
→
_ _ °C
→
Air_ _ °C
→
ODO
→
TRIP 1
→
TRIP 2
→
TRIP CD
→
TRIP F
For the UK:
TRIP F
→
km/L, L/100 km or MPG
→
AVE_ _._
km/L, AVE_ _._ L/100 km or AVE_ _._ MPG
→
_ _ °C
→
Air_ _ °C
→
ODO
→
TRIP 1
→
TRIP
2
→
TRIP CD
→
TRIP F
TIP
• Push the bottom set button to change the dis-
play in the reverse order.
• You can manually reset the fuel reserve trip-
meter, or after refueling and traveling 5 km (3
mi) it will reset automatically and disappear
from the display.
1. Multi-function display
1