Yamaha Tenere 700 2020, Service Manual

Page: 31 / 472

CHASSIS SPECIFICATIONS
2-8
Rear brake
Type Hydraulic single disc brake
Rear disc brake
Disc outside diameter
×
thickness 245.0
×
5.0 mm (9.65
×
0.20 in)
Brake disc thickness limit 4.5 mm (0.18 in)
Brake disc runout limit (as measured on wheel) 0.15 mm (0.0059 in)
Brake pad lining thickness limit 3.9 mm (0.15 in)
Master cylinder inside diameter 12.7 mm (0.50 in)
Caliper cylinder inside diameter 34.00 mm (1.34 in)
Specified brake fluid DOT 4
Front suspension
Type Telescopic fork
Spring Coil spring
Shock absorber Hydraulic damper
Wheel travel 210 mm (8.3 in)
Fork spring free length 422.0 mm (16.61 in)
Limit 413.6 mm (16.28 in)
Inner tube bending limit 0.2 mm (0.01 in)
Recommended oil Yamaha Suspension Oil G10
Quantity (left) 624.0 cm³ (21.10 US oz, 21.96 Imp. oz)
Quantity (right) 624.0 cm³ (21.10 US oz, 21.96 Imp. oz)
Level 85.0 mm (3.35 in)
Rebound damping
Adjusting system Mechanical adjustable type
Unit for adjustment Click
Adjustment value from the start position (Soft) 31
Adjustment value from the start position (STD) 17
Adjustment value from the start position (Hard) 0
Compression damping
Adjusting system Mechanical adjustable type
Unit for compression damping adjustment Click
Adjustment value from the start position (Soft) 22
Adjustment value from the start position (STD) 11
Adjustment value from the start position (Hard) 0
Rear suspension
Type Swingarm (link suspension)
Spring Coil spring
Shock absorber Gas-hydraulic damper
Wheel travel 200 mm (7.9 in)
Spring preload
Adjusting system Mechanical adjustable type
Unit for adjustment Click
Adjustment value (Soft) 0
Adjustment value (STD) 10
Adjustment value (Hard) 24
Rebound damping
Adjusting system Mechanical adjustable type
Unit for adjustment Click
Adjustment value from the start position (Soft) 23
Adjustment value from the start position (STD) 13