Yamaha Tenere 700 2020, Service Manual

Page: 203 / 472

CAMSHAFTS
5-16
EAS30269
INSTALLING THE CAMSHAFTS
1. Align:
• Mark “a” on the generator rotor
(with the slot “b” in the generator rotor cover)
a. Turn the crankshaft counterclockwise.
b. When piston #1 is at TDC, align the TDC
mark “a” on the generator rotor with the
slot “b” in the generator rotor cover.
2. Install:
• Intake camshaft sprocket “1”
NOTICE
ECA19980
Be sure to tighten the camshaft sprocket
bolts to the specified torque to avoid the
possibility of the bolts coming loose and
damaging the engine.
TIP
• Make sure that the marks “a” on the intake
camshaft sprocket are aligned with cam lobe
#1 “b” as shown in the illustration.
• While holding the intake camshaft sprocket
with the rotor holding tool “2”, tighten the intake
camshaft sprocket bolts in the proper tighten-
ing sequence as shown.
3. Install:
• Decompressor lever pins “1”
• Decompressor lever #1 “2”
• Decompressor lever #2 “3”
TIP
• Face the cutout “a” in each decompressor le-
ver pin toward the exhaust camshaft sprocket.
• Install the decompressor lever pins, decom-
pressor lever #1, and decompressor lever #2
into the exhaust camshaft as shown in the illus-
tration.
4. Install:
• Exhaust camshaft sprocket “1”
T
R
.
.
Intake camshaft sprocket bolt
24 N·m (2.4 kgf·m, 18 lb·ft)
1
2
2
b
a
Rotor holding tool
90890-01235
Universal magneto and rotor
holder
YU-01235
T
R
.
.
Exhaust camshaft sprocket bolt
24 N·m (2.4 kgf·m, 18 lb·ft)
1
b
a
1
2
2
1
1
a
1
1 1
a
2 3