Yamaha RCX40, User Manual

Page: 108 / 388

4-
48
Operation
4
10. “PROGRAM” mode
10.2 Program editing
[Procedure]
1) Press the
F 1
(EDIT) key in “PROGRAM” mode.
A cursor appears on the top line of a program list as shown in Fig. 4-10-2, allowing
program editing.
2) Use the cursor keys to move the cursor to the position to be edited and enter a
program command with the MPB.
A maximum of 75 characters can be entered on one line.
Fig. 4-10-2 “PROGRAM>EDIT” mode
PROGRAM >EDIT
<TEST2 >
1
’***** TEST2 PROGRAM *****
2 GOSUB *SUBPROG
3 DO2(0)=0
4 WAIT DI3(4,3,2)=3
5 MOVE P,P0 ’ORIGIN
SELECT COPY CUT PASTE BS
———————————————————————————————————————————
1 2 3
Pressing the key finishes the program input for one line and moves the cursor to
the beginning of the next line.
3) When program editing is complete, press the
ESC
key.
n
NOTE
Program editing is finished when any
of the key, up/down cursor
(↑
/
↓)
keys, page up/down (
>>
/
<<
)
keys, or
ESC
key is pressed during
program editing.
A maximum of 9999 lines can be
written in one program as long as the
program size is within about 98
Kbytes.