Yamaha RCX40, User Manual

Page: 179 / 388

4-
119
4
Operation
11. “MANUAL” mode
11.6.1 Editing hand definitions
[Procedure]
1) Press the
F 1
(EDIT) key in “MANUAL>HAND” mode.
2) Use the cursor (
↑
/
↓
) keys to select the hand definition you want to edit.
An edit cursor appears at the left end of the selected hand definition line.
Fig. 4-11-72 Hand editing screen (1)
MANUAL >HAND>EDIT 50% [MG][S0H1X]
————————————1———————2———————3———————4———
H0 = 0 0.00 0.00
H1 = _ 0.00 100.00 0.00 R
H2 = 90.00 100.00 100.00 R
H3 = 8000 100.00 100.00
[POS] 600.00 0.00 0.00 0.00
UNDO
3) Use the cursor (
←
/
→
) key to move the cursor to the position you want to edit.
4) Use the
0
to
9
,
+
,
–
,
.
,
SPACE
,
R
and keys to
enter the data.
Fig. 4-11-73 Hand editing screen (2)
MANUAL >HAND>EDIT 50% [MG][S0H1X]
————————————1———————2———————3———————4———
H0 = 0 0.00 0.00
H1 = 45.00 300 100 R_
H2 = 90.00 100.00 100.00 R
H3 = 8000 100.00 100.00
[POS] 600.00 0.00 0.00 0.00
UNDO
5) Pressing the key or cursor up/down (
↑
/
↓
) keys finishes the hand definition
settings.
Press the
ESC
key if you wan to cancel the settings.
6) To continue editing, repeat steps 2) to 4).
7) Press the
ESC
key to quit editing and return to “MANUAL>HAND” mode.
Valid keys and submenu descriptions in “MANUAL>HAND>EDIT” mode are shown
below.
Valid keys Menu Function
F1 UNDO
Reverses the last data input and restores the preceding data.
n
NOTE
The hand definition data on which the
cursor was positioned when returning
to “MANUAL>HAND” mode is used
as the current hand definition.