Yamaha RCX40, User Manual

Page: 251 / 388

4-
191
4
Operation
12. “SYSTEM” mode
1. “SERVICE” mode level
Set the service mode level by referring to the table below.
Level 3
Prohibited Disabled Level 2
Allowed Enabled Level 1
Allowed Disabled Level 0
AUTO mode operation Hold to Run function
Description
Enabled Prohibited
[Procedure]
1) Select “1. Service level” in “SYSTEM>OPTION>SERVICE” mode.
2) Press the
F 1
(EDIT) key.
Fig. 4-12-66 Editing the "SERVICE" mode level
SYSTEM >OPTION>SERVICE V8.01
1.Service level
2.Movement Vel <3%
3.Operating device MPB
LEVEL 0 LEVEL 1 LEVEL 2 LEVEL 3
LEVEL 3
3) Select the “SERVICE” mode level with the
F 1
(LEVEL 0) to
F 4
(LEVEL
3) keys.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
n
NOTE
The settings made here are only valid
until the controller power is turned
off. Save these settings if you want to
use them again after power is turned
off.
w
WARNING
Settings may be changed but the
customer must bear
responsibility for them. The
customer should keep safety in
mind when making changes.