Yamaha RCX40, User Manual

Page: 155 / 388

4-
95
4
Operation
11. “MANUAL” mode
11.3.1 Editing pallet definitions
[Procedure]
1) In “MANUAL>PALLET” mode, select the pallet number with the cursor (
↑
/
↓
)
keys.
2) Press the
F 1
(EDIT) key to enter “MANUAL>PALLET>EDIT” mode.
3) Use the cursor (
↑
/
↓
) keys to move the cursor to the position you want edit.
4) Use the
0
to
9
keys to enter the desired value.
The maximum number of points per pallet must be within 32767 (=NX*NY*NZ).
Fig. 4-11-36
MANUAL >PALLET>EDIT 50%[MG][S0H0X]
PALLET NO. =PL0 [XY]
Used point =P3996-P4000
NX = 3
NY = 4
NZ = 5_
POINT
5) Press the key to determine the input value.
6) To continue editing, repeat steps 3) to 5).
7) Press the
ESC
key to quit editing and return to “MANUAL>PALLET” mode.
Valid keys and submenu descriptions in “MANUAL>PALLET>EDIT” mode are shown
below.
Valid keys Menu Function
Cursor key
(
↑
/
↓
)
F1 POINT
Move cursors.
Set point data in the pallet definitions.
n
NOTE
The maximum number of points per
pallet is 32767 (=NX*NY*NZ).