Yamaha RCX40, User Manual

Page: 242 / 388

4-
182
Operation
4
12. “SYSTEM” mode
6. Termination code
This parameter sets the line feed code.
[Procedure]
1) Select “6. Termination code” in “SYSTEM>CMU” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-54 Setting the “Termination code”
SYSTEM >CMU V8.01
3.Baud rate 9600
4.Stop bit 1
5.Parity ODD
6.Termination code CR
7.XON/XOFF control YES
CR CRLF
3) Select the line feed with the
F 1
(CR) or
F 2
(CRLF) key.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
7. XON/XOFF control
This parameter sets whether to control the data flow using XON/XOFF control.
[Procedure]
1) Select “7. XON/XOFF control” in “SYSTEM>CMU” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-55 Setting the “XON/XOFF control”
SYSTEM >CMU V8.01
3.Baud rate 9600
4.Stop bit 1
5.Parity ODD
6.Termination code CR
7.XON/XOFF control YES
YES NO
3) Select XON/XOFF control with the
F 1
(YES) or
F 2
(NO) key.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
n
NOTE
Data omissions may occur if data
flow control is not performed. Make
use of data flow control as much as
possible.